LaskaKit ESPink ESP32 e-Paper v3.6
LaskaKit ESPink ESP32 e-Paper v3.6. The original Inkora platform with verified display power control, battery measurement and deep sleep.
Compatibility
Supported hardware
Inkora is designed for a small set of tested boards and displays. Using a supported combination keeps installation, battery measurement, display power control and sleep behaviour predictable.
Control boards
The installer detects the board before it initializes the display and stores the hardware identity for the main firmware.
Seeed Studio EE05 / XIAO ESP32-S3 Plus
Seeed Studio EE05 / XIAO ePaper Display Board with XIAO ESP32-S3 Plus. Board detection and display autodetection are supported. Battery-voltage calibration is board-specific.
Displays
Both supported control boards can use the supported display profiles below. The installer detects the connected panel only after the board is known.
✓ SupportedB/W/Red · 800×480
Waveshare 7.5" e-Paper (B) V3
Partial refresh: supported by Inkora
Three-colour black/white/red 800×480 panel. Inkora includes a dedicated partial-refresh path for the setup/status area. Full-screen fast refresh exists as an experimental firmware path and is not enabled by default in firmware 1.1.0.
✓ SupportedB/W/Red/Yellow · 800×480
Good Display GDEM075F52
Partial refresh: not used by Inkora
Four-colour black/white/red/yellow 800×480 panel with JD79665AA controller. Firmware 1.1.0 uses the safe full-refresh path for this display.
Compatibility matrix
| Board | Waveshare 7.5 B V3 | GDEM075F52 |
|---|---|---|
| ESPink 3.6 | ✓ Supported | ✓ Supported |
| Seeed Studio EE05 | ✓ Supported | ✓ Supported |
Important
Do not select a display only by its 7.5-inch size. The controller and panel revision matter. Inkora supports the exact profiles listed here; another visually similar e-paper panel may use a different controller or waveform.
Compatibility levels
Supported means the firmware contains a dedicated board/display path. Experimental features are not presented as normal supported behaviour until they have been validated on real hardware.
Read the user manual →